Zte ZXR10 2900E series Configuration Manual page 254

ZXR10 2900E Series Configuration Guide
Command
zte(cfg-group)#
zte(cfg-group)#
zte(cfg-group)#
zte(cfg-group)#
zte(cfg-group)#
show ztp (all configuration modes)
show ztp device [<idlist>](all configuration modes)
show ztp topology (all configuration modes)
show ztp mac <HH.HH.HH.HH.HH.HH> (all configuration modes)
zte(cfg-group)#
<A.B.C.D/M>]
zte(cfg-group)#
zte(cfg-group)#
zte(cfg-group)#
H>[<1-253>]| device <idlist>}
zte(cfg-group)#
zte(cfg-group)#
zte(cfg-group)#
zte(cfg-group)#
SJ-20130731155059-002|2013-11-27 (R1.0)
set ztp hop <1-128>
set ztp timer<0-60>
set ztp portdelay <1-100>
set ztp hopdelay <1-1000>
ztp start
set group commander ipport <0-63>[ip-pool
set group candidate
set group independent
set group add {mac <HH.HH.HH.HH.HH.H
set group delete member <idlist>
set group handtime <1-300>
set group holdtime <1-300>
set group name <name>
6-24
Function
Sets a range (hop count) of
collecting topology information.
Sets a time interval for collecting
topology information automatically.
Sets a port delay for forwarding
topology requests.
Sets a hop delay for forwarding
topology requests.
Starts collecting topology
information.
Displays ZTP global configuration.
Displays the configuration
information according to the
device ID.
Displays network topology in a
simple graph.
Displays detailed information of
a device according to the MAC
address.
Sets a command switch, specifies
a layer-3 port number for cluster
management and sets an IP
address pool for cluster members.
Sets a switch to be a candidate
switch.
Sets a switch to be an independent
switch.
Adds a switch to a cluster.
Deletes a switch from a cluster.
Sets a time interval for handshake
between the command switch and
the member switch.
Sets hold time of information about
switches in a cluster.
Sets a cluster name.
ZTE Proprietary and Confidential