Zte ZXR10 2900E series Configuration Manual page 105

Command
show qos traffic-limit [port <1-28>] trap (all configuration modes)
show qos traffic-limit [port <1-28>] (all configuration modes)
show qos traffic-shaping [port <1-28>] (all configuration modes)
show anti-dos (all configuration modes)
show qos traffic-limit [protect | port <1-28> protect]
zte(cfg)#
<32-10485760> cbs <20000-268435456>{ebs <20000-268435456>|
pir <32-10485760> pbs <20000-268435456>}
zte(cfg)#
| drop | remark} yellow {no-operation | drop | remark}
zte(cfg)#
<0-127> up {no-change | enable-modify | disable-modify} dscp {
no-change | enable-modify | disable-modify }
zte(cfg)#
zte(cfg)#
disable}
zte(cfg)#
<0-383>
zte(cfg)#
rule <1-500> profile <0-127> up {no-change | enable-modify |
disable-modify} dscp {no-change | enable-modify | disable-modify}
zte(cfg)#
1-500> up { no-change |< 0-7>} dscp { no-change |< 0-63>}
zte(cfg)#
zte(cfg)#
<1-500>{cpu | analyze-port}
SJ-20130731155059-002|2013-11-27 (R1.0)
set qos policer <0-383> mode {aware | blind} cir
set qos policer <0-383> exceed-action red {no-operation
set qos policer <0-383> exceed-action remark profile
set qos policer counter-mode {L1 | L2 | L3}
set qos policer <0-383> counter <0-255>{enable |
set policy policing in acl <1-828> rule <1-500> policer
set policy remark in ingress-acl <1-399,800-828>
set policy remark in egress-acl < 400-799> rrulle <
set mirror analyze-port session <1-3>{enable | disable}
set policy mirror in acl <1-399,800-828> rule
Chapter 5 Service Configuration
5-57
ZTE Proprietary and Confidential
Function
Displays trap function
configuration.
Displays ingress rate limit
configuration.
Displays egress shaping
configuration.
Displays the DOS anti-attack
configuration.
Displays the port protection
configuration.
Sets the flow policer.
Sets flow policing action.
Sets the binding and action
implementation mode between the
flow policer and the QoS profile.
Sets the flow policer statistics
mode.
Enables or disables the flow
policer statistics function and
configures the binding between
the flow policer and the counter.
Enables the flow policer and
handles the special flow by the
flow policer.
Uses the QoS profile to modify the
specified flow UP/DSCP field that
the ingress ACL matches.
Uses the QoS profile to modify the
specified flow UP/DSCP field that
the egress ACL matches.
Sets the session between flow
mapping port and port mapping .
Copies the specified data flow to
the monitor port.