Zte ZXR10 2900E series Configuration Manual page 245

Command
zte(cfg-snmp)#
<string>[write <string>[notify <string>]]]
zte(cfg-snmp)#
sha-auth <string>[des56-priv <string>]]
zte(cfg-snmp)#
trunk<1-15>}{enable|disable}
zte(cfg-snmp)#
interval<1-3600>}
zte(cfg-snmp)#
zte(cfg-snmp)#
zte(cfg-snmp)#
zte(cfg-snmp)#
zte(cfg-snmp)#
zte(cfg-snmp)#
show snmp (all configuration modes)
show snmp {community | engineID | group | host | trap | user |
view} (all configuration modes)
SNMP Configuration Instance 1
l
Configuration Description
Assume that the IP address of the network management server is 10.40.92.105,
the switch has a layer-3 port with the IP address of 10.40.92.200, and the switch is
managed through the network management server.
Create a community named "zte" with the read/write permission and a view named
"vvv", and then associate the community "zte" with the view "vvv". Set the IP address
of the computer receiving traps to 10.40.92.105, and the community to "zte".
The DUT device is directly connected to network management server.
l
Configuration Procedure
zte(cfg)#config router
zte(cfg-router)#set ipport 0 ipaddress 10.40.92.200 255.255.255.0
zte(cfg-router)#set ipport 0 vlan 2
zte(cfg-router)#set ipport 0 enable
SJ-20130731155059-002|2013-11-27 (R1.0)
set group <string> v3 {auth | noauth | priv}[read
set user <string><string> v3 [md5-auth <string>|
set trap macnotification {port<1-51>|
set trap macnotification {history-size<1-256>|
clear host <A.B.C.D>{trap | inform}<string>
clear community <string>
clear view <string>
clear group <string> v3 {auth | noauth | priv}
clear user <string> v3
clear engineID
6-15
Chapter 6 Management
Function
Sets an SNMP V3 group name
and the group security level.
Sets an SNMP V3 user name,
authentication mode and
password.
Enables or disables the trap
function of MAC change
notification on a specific port
or trunk.
Sets the threshold of the number
and interval of MAC change
notifications.
Clears a host configuration.
Clears a community name.
Clears a view.
Clears a group.
Clears a user.
Clears an SNMP engine identifier
and recovers to the default value.
Displays all SNMP configuration
information.
Displays each element of SNMP
V1, V2C and V3.
ZTE Proprietary and Confidential