Sqinq Configuration; Figure 5-25 Qinq Configuration Instance - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide

Figure 5-25 QinQ Configuration Instance

l
Configuration Procedure
/*set qinq, the outer label is 100*/
zte(cfg)#set vlan 100 enable
zte(cfg)#set vlan 100 add port 1 untag
zte(cfg)#set vlan 100 add port 24 tag
zte(cfg)#set port 1 pvid 100
zte(cfg)#set vlan qinq customer port 1 enable
zte(cfg)#set vlan qinq uplink port 24 enable
zte(cfg)#set vlan 999 enable
zte(cfg)#config router
zte(cfg-router)#set ipport 1 ipaddress 192.168.0.1/24
zte(cfg-router)#set ipport 1 vlan 999
zte(cfg-router)#set ipport 1 enable
zte(cfg-router)#exit

5.21 SQinQ Configuration

SQinQ Overview
The SQinQ is a type of VLAN tunnel technology. It provides multi-point to multi-point VLAN
transparent transportation service and simple Layer 2 VPN tunnel by means of adding a
VLAN tag outside original 802.1Q tag and getting rid of outside VLAN tag when the packet
is transported to edge switch.
The SQinQ provides the function of providing SPVLAN tag according to traffic, which
is different from that ordinary QinQ adds SPVLAN tag based on ports. That is, in the
same Customer port, according to difference between traffic carried CVLAN tags, provide
corresponding SPVLAN tag based on user demands.
SJ-20130731155059-002|2013-11-27 (R1.0)
5-82
ZTE Proprietary and Confidential