Lacp Configuration - Zte ZXR10 2900E series Configuration Manual

Command
show mac learning except session [<1-100>]
show mac learning except {port <portlist>|trunk<trunklis
t>}
show mac protect [portlist]

5.6 LACP Configuration

LACP Overview
The Link Aggregation Control Protocol (LACP) is a standard protocol defined in IEEE
802.3ad.
Link aggregation means that physical links with the same transmission media and
transmission rate are "bound" together, making them look like one link logically. This
concept is also known as Trunk.
bandwidths of parallel physical links between the switches or between the switch and the
server. As a result, it becomes an important technology in increasing the link bandwidth
and creating link transmission flexibility and redundancy.
An aggregated link is also called trunk. If a port of the trunk is blocked or faulty, the data
packets will be distributed to other ports of this trunk for transmission. If this port recovers,
the data packets will be redistributed to all the normal ports of this trunk for transmission.
The ZXR10 2900E supports up to 15 aggregation groups. In each aggregation group, the
number of aggregated links does not exceed eight.
Configuring LACP
The LACP configuration includes the following commands:
Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
mixed }
SJ-20130731155059-002|2013-11-27 (R1.0)
set trunk <trunklist> pvid <1-4094>
set lacp {enable | disable}
set lacp aggregator <1-15>{add | delete} port <portlist>
set lacp aggregator <1-15> mode {dynamic | static |
Chapter 5 Service Configuration
Function
Displays the configuration of sessions for
which specified source MAC learning is
not needed.
Displays the binding relation between
ports/trunks and sessions.
Displays the MAC protection state to check
whether MAC protection is triggered.
It allows simultaneous multiplied increase of the
5-17
ZTE Proprietary and Confidential
Function
Sets the default trunk VID.
Enables or disables the LACP
function.
Adds or deletes a specified port
to/from an LACP aggregation
group.
Sets aggregation mode of an
LACP aggregation group.