Zte ZXR10 2900E series Configuration Manual page 66

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
show trunk (all configuration modes)
show trunk [<trunklist>] (all configuration modes)
show trunk <trunklist> vlan (all configuration modes)
show lacp (all configuration modes)
show lacp aggregator (all configuration modes)
show lacp aggregator <1-15> (all configuration modes)
show lacp port (all configuration modes)
show lacp port [<portlist >] (all configuration modes)
zte(cfg)#
LACP Configuration Instance
l Configuration Description
Switch A and switch B are connected through the aggregation port (binding the port
15 and port 16). Port 1 of switch A and port 2 of switch B belong to VLAN2. Port 3 of
switch A and port 4 of switch B belong to VLAN3. Members of the same VLAN can
communicate with each other. See
SJ-20130731155059-002|2013-11-27 (R1.0)
set lacp port <portlist> mode {active | passive}
set lacp port <portlist> timeout {long | short}
set lacp priority <1-65535>
set lacp load-balance {port | packet {L2 | L3 | L4}}
clear trunk <trunklist>{ multicast-filter}
Figure 5-3.
5-18
ZTE Proprietary and Confidential
Function
Sets the mode used by the port to
participate in the aggregation.
Sets the timeout information
of the port participating in the
aggregation.
Sets the priority of LACP.
Sets LACP load balancing mode.
Displays the Port VLAN IDs
(PVIDs) of all trunks and
unregistered multicast filtering
configuration.
Displays the trunk PVID and
unregistered multicast filtering
configuration.
Displays the VLAN configuration
of trunk.
Displays the LACP global
configuration information.
Displays brief information of all
LACP aggregation groups.
Displays detailed information of an
LACP aggregation group.
Displays aggregation status
information of all the LACP
member ports.
Displays aggregation status
information of LACP member
ports.
Clears the flag of the port multicast
filter.