Zte ZXR10 2900E series Configuration Manual page 184

ZXR10 2900E Series Configuration Guide
l Optional TLVs: includes a basic management TLV set (such as port description TLV),
a special TLV set defined by IEEE 802.1, a special TLV set defined by IEEE 802.3,
and an LLDP-MED TLV set defined by TIA.
l
End of LLDPDU TLV: indicates the end of an LLDPDU.
Configuring LLDP
The LLDP configuration includes the following commands:
Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
| extended-power-tlv | inventory-tlv | location-tlv |
network-policy-tlv}{enable | disable}
zte(cfg)#
zte(cfg)#
zte(cfg)#
show lldp config port <portlist> (all configuration modes)
show lldp neighbor port <portlist> (all configuration modes)
show lldp entry port <portlist> (all configuration modes)
SJ-20130731155059-002|2013-11-27 (R1.0)
lldp hellotime <5-32768>
lldp holdtime <2-10>
lldp max-neighbor <1-31>
lldp port <portlist>{enable | disable}
lldp port <portlist>{txenable | txdisable}
lldp port <portlist>{rxenable | rxdisable}
lldp port <portlist> med-tlv-select {capabilities-tlv
lldp port <portlist> max-neighbor <1-8>
clear lldp neighbor port <portlist>
clear lldp statistic port <portlist>
5-136
ZTE Proprietary and Confidential
Function
Sets the interval for sending LLDP
neighbor discovery messages.
Sets the LLDP neighbor holding
time.
Sets the maximum number of
neighbors that can be discovered
by LLDP.
Enables or disables all LLDP
functions on a specific port.
Enables or disables the LLDP
sending function on a specific port.
Enables or disables the LLDP
receiving function on a specific
port.
Sets the optional MED TLV type
sent on a port.
Sets the maximum number of
neighbors that can be discovered
on a specific LLDP port.
Clears LLDP neighbors with whom
neighbor relationships have been
established.
Clears statistics information of
LLDP neighbors.
Displays LLDP configuration
information.
Displays summary information of
LLDP neighbors.
Displays detailed information of
LLDP neighbors.