Ag Configuration - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
mac-mask FF.FF.FF.FF.FF.FF
zte(cfg)#set vlan voice-vlan port 2 oui-id 1 mac-addr 00.00.01.00.00.02
mac-mask FF.FF.FF.FF.FF.FF
zte(cfg)#set vlan voice-vlan port 1 ingress-vlan 10 voice-vlan 100
zte(cfg)#set vlan voice-vlan port 2 ingress-vlan 20 voice-vlan 100
l
Configuration Verification
zte(cfg)#show vlan voice-vlan
Port Id: 1
Customer Vlan List: 10
Voice-vlan
Oui configed
Port Id: 2
Customer Vlan List: 20
Voice-vlan
Oui configed
oui-id: 1

5.42 802.1ag Configuration

802.1ag Overview
For IEEE802.1ag, the Connectivity Fault Management (CFM) function checks, separates
and reports connectivity faults of the virtual bridge LAN. It is used in operators' network
and also valid for the Customer VLAN (C-VLAN) network.
The network manager performs planning on network services and levels for the
management and maintenance purposes. The entire network is divided into multiple
Management Domains (MDs). For a single management domain, see
SJ-20130731155059-002|2013-11-27 (R1.0)
: 100
:
oui-id: 1 mac: 00.00.01.00.00.01
: 100
:
mac: 00.00.01.00.00.02
mask: FF.FF.FF.FF.FF.FF
mask: FF.FF.FF.FF.FF.FF
5-148
ZTE Proprietary and Confidential
Figure 5-54.