Zte ZXR10 2900E series Configuration Manual page 109

Command
zte(cfg)#
<portlist>|promise-trunk<trunklist>}{isolate-port<portlist>|isola
te-trunk<trunklist>}{communi-port<portlist>|communi-trunk
<trunklist>}
clear vlan pvlan [session<1-4>]
show vlan pvlan [session<1-4>] (all configuration modes)
zte(cfg)#
<portlist>|promise-trunk<trunklist>|isolate-port<portlist>|isola
te-trunk<trunklist>|communi-port <portlist>| communi-trunk
<trunklist>}
PVLAN Configuration Example One
l Configuration Description
Add a hybrid port 26 and isolated ports 1, 2, and 3 to session 1. See
Figure 5-14 PVLAN Configuration Example 1
l
Configuration Procedure
zte(cfg)#set vlan pvlan session 1 promis-port 26 isolate-port 1-3
l
Configuration Verification
zte(cfg)#show vlan pvlan
pvlan session
promis-ports
promis-trunks
isolate-ports
SJ-20130731155059-002|2013-11-27 (R1.0)
set vlan pvlan session <1-4>{promise-port
set vlan pvlan session <1-4>{promise-port
: 1
: 26
:
: 1-3
Chapter 5 Service Configuration
5-61
ZTE Proprietary and Confidential
Function
Sets the PVLAN function.
Clears the PVLAN configuration.
Displays the PVLAN configuration.
Configures a type of PVLAN port.
Figure 5-14.