Figure 5-57 Lm Network Configuration Instance - Zte ZXR10 2900E series Configuration Manual

Command
zte(cfg)#
<1-8191> two-dm send-packet [continue-time <60-600> interval
<1-60>]
zte(cfg)#
<1-8191> two-dm send-packet stop
zte(cfg)#
mep-id <1-8191>{ one-lm | two-lm | two-dm }
zte(cfg)#
mep-id <1-8191> relate-rmep
LM Network Configuration
l Configuration Description
The network configuration is illustrated by using the network instance in

Figure 5-57 LM Network Configuration Instance

l
Configuration Procedure
Configuration on S1:
zte(cfg)#cfm enable
zte(cfg)#create cfm md-session 1 name zte_1 level 5
zte(cfg)#create cfm md-session 1 ma-session 1 name zte_zte_1
zte(cfg)#cfm md-session 1 ma-session 1 primary-vlan 100
zte(cfg)#create cfm md-session 1 ma-session 1 mep-session 1 mep-id 1
direction down
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 state enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 ccm-send enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 ccm-receive enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 assign port 1
zte(cfg)#create cfm md-session 1 ma-session 1 rmep-session 2 rmep-id 2
remote-mac 00.d0.d0.c0.00.02
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 2 ccm-receive enable
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 relate-to rmep-id 2
zte(cfg)#cfm md-session 1 ma-session 1 mep-id 1 one-lm (two-lm)
Configuration on S2:
SJ-20130731155059-002|2013-11-27 (R1.0)
cfm md-session <1-16> ma-session <1-32> mep-id
cfm md-session <1-16> ma-session <1-32> mep-id
clear cfm md-session <1-16> ma-session <1-32>
clear cfm md-session <1-16> ma-session <1-32>
Chapter 5 Service Configuration
5-155
ZTE Proprietary and Confidential
Function
Starts DM detection at both ends.
Stops DM detection at both ends.
Clears the results of LM detection
at one end and at both ends, as
well as the result of DM detection
in both directions.
Clears the related remote MEP.
Figure
enable
5-57.