File System Configuration Commands - Zte ZXR10 2900E series Configuration Manual

serverip
netmask
ipaddr
bootfile
username
password
MAC
Hit any key to stop autoboot:
[ZXR10 Boot]:
[ZXR10 Boot]:zte
[bootManager]: cd img
[bootManager]: ftp get zImage
............................................
............................................
............................................
Ftp get zImage successfully, 7397428 bytes received.
[bootManager]:
8. In BootManager status, use the reboot command to restart the switch by using the new
version. If the switch is started normally, use the show version command to verify that
the new version is operating in the memory. If the switch cannot be started normally, it
indicates that the version upgrade has failed. In this case, repeat the above upgrade
procedure from step 1.

4.9 File System Configuration Commands

File system configuration includes the following commands:
Command
zte(cfg-tffs)#
zte(cfg-tffs)#
zte(cfg-tffs)#
zte(cfg-tffs)#
zte(cfg-tffs)#
zte(cfg-tffs)#
ame>[<local-file-name>]
zte(cfg-tffs)#
-file-name>[<local-file-name>]
zte(cfg-tffs)#
zte(cfg-tffs)#
zte(cfg-tffs)#
SJ-20130731155059-002|2013-11-27 (R1.0)
0
md <directory name>
remove <file-name>
rename <file-name><file-name>
ls
cd <directory name>
tftp <A.B.C.D>{download | upload}<remote-file-n
tftp commander {download | upload}<remote
copy <source-pathname><dest-pathname>
format
update bootrom
4-15
Chapter 4 System Management
: 10.40.89.78
: 255.255.255.0
: 10.40.89.79
: /img/zImage
: ZXR10
: ZXR10
: 00:d0:d0:30:20:10
Function
Creates a directory.
Deletes a file or directory.
Modifies a file or directory name.
Displays a sub-directory and file.
Changes the current directory.
Uploads or downloads files to/from
the TFTP server.
Uploads or downloads files to/from
the cluster commander.
Copies files.
Formats the Flash memory.
Updates the bootrom.
ZTE Proprietary and Confidential