Zte ZXR10 2900E series Configuration Manual page 73

Command
zte(cfg)#
vlan <vlanlist>
zte(cfg)#
group <ipv6-address> port <portlist>
zte(cfg)#
group <ipv6-address>[port <portlist>]
zte(cfg)#
delete} mrouter port <port-id>
zte(cfg)#
mrouter-time-out }<30-65535>
zte(cfg)#
<30-65535>
zte(cfg)#
val <1000-25000>
zte(cfg)#
<1-25>
zte(cfg)#
<vlanlist>{enable | disable}
zte(cfg)#
version <1-2>
zte(cfg)#
disable}
zte(cfg)#
disable}
zte(cfg)#
zte(cfg)#
zte(cfg)#
< portlist> vlan <vlanlist>
zte(cfg)#
< trunklist> vlan <vlanlist>
show mld snooping (all configuration modes)
show mld snooping vlan <1-4094>[group
<ipv6-address>| port-info | group-source-filter |
host-source-filter ] (all configuration modes)
show mld snooping mr-port-info (all configuration
modes)
SJ-20130731155059-002|2013-11-27 (R1.0)
set mld snooping add maxnum <1-256>
set mld snooping vlan <1-4094> add
set mld snooping vlan <1-4094> delete
set mld snooping vlan <1-4094>{add |
set mld snooping { host-time-out |
set mld snooping query-interval
set mld snooping query-response-inter
set mld snooping last-member-query
set mld snooping query vlan
set mld snooping query vlan <vlanlist>
set mld snooping query {enable |
set mld snooping fastleave {enable |
set mld snooping robustness <1-7>
set mld filter {enable | disable}
set mld filter {add | delete} query port
set mld filter {add | delete} query trunk
Chapter 5 Service Configuration
Function
Sets the maximum number of multicast groups
of a specific VLAN.
Adds a static group to a specific VLAN and adds
a port to the static group.
Clears static groups in a specific VLAN and
clears the ports in the static groups.
Adds or clears a routing portsin a specific VLAN.
Sets the time-out period between the router port
and the host port.
Sets the interval for sending query packets.
Sets the interval for sending report packets.
Sets the time of waiting for a query response
when the last member leaves.
Enables or disables the query function in a
specific VLAN.
Sets the MLD version of query packets.
Enables or disables the query function.
Enables or disables the fast leave function.
Sets the MLD robustness value.
Enables or disables the filter function globally.
Adds or deletes the query packet filter for the
specified port.
Adds or deletes the query packet filter for the
specified trunk port.
Displays global MLD snooping configuration
information.
Displays the MLD snooping result.
Displays MLD router port information.
5-25
ZTE Proprietary and Confidential