Zte ZXR10 2900E series Configuration Manual page 246

ZXR10 2900E Series Configuration Guide
zte(cfg-router)#exit
zte(cfg)#config snmp
zte(cfg-snmp)#create community zte private
zte(cfg-snmp)#create view vvv
zte(cfg-snmp)#set community zte view vvv
zte(cfg-snmp)#set host 10.40.92.105 trap v2 zte
zte(cfg-snmp)#show snmp community
CommunityName
-------------- -------
zte
zte(cfg-snmp)#show snmp view
ViewName
--------- -------- ------------------------
vvv
zte(cfg-snmp)#show snmp host
HostIpAddress
-------------- ---------- ------- ------ -------------
10.40.92.105
SNMP Configuration Instance 2
l
Configuration Description
Assume that the IP address of the network management server is 10.40.92.77, the
switch has a layer-3 port with the IP address of 10.40.92.11, and the switch is managed
through the network management server in the User Security Model (USM).
Create a user named "zteuser" and its group named "ztegroup". The security level of
the group is private (that is authentication and encryption). Set the IP address of the
computer receiving trap or inform information to 10.40.92.77, and the user to "zteuser".
l
Configuration Procedure
zte(cfg)#config router
zte(cfg-router)#set ipport 1 ipaddress 10.40.92.11/24
zte(cfg-router)#set ipport 1 vlan 1
zte(cfg-router)#set ipport 1 enable
zte(cfg-router)#exit
zte(cfg)#config snmp
zte(cfg-snmp)#set group ztegroup v3 priv
zte(cfg-snmp)#set user zteuser ztegroup v3 md5-auth zte des56-priv zte
zte(cfg-snmp)#set host 10.40.92.77 inform v3 zteuser priv
SJ-20130731155059-002|2013-11-27 (R1.0)
Level ViewName
------------ ---
private vvv
Exc/Inc MibFamily
Include 1.3.6.1
Comm/User Version type
zte Ver.2c
6-16
Acl
-
SecurityLevel
Trap
ZTE Proprietary and Confidential