The switch version file and configuration file can be backed up or recovered through FTP.
The FTP server application software is started at the back end to communicate with the
switch (FTP client) to implement file backup and recovery. This procedure describes how
to configure the back-end FTP server using FileZilla Server (FTP server software) as an
example.
Steps
1. Run the FileZilla Server software on the back-end computer. The Connect to Server
dialog box is displayed, see
Figure 4-3 Connect to Server Dialog Box
2. Set Server Address, Port and Administration password, and click OK. The FileZilla
Server window is displayed, see
Figure 4-4 FileZilla Server Window
3. Select Edit > Users. The Users dialog box is displayed, see
user name and password.
SJ-20130731155059-002|2013-11-27 (R1.0)
Figure
4-3.
Figure
4-4.
4-5
Chapter 4 System Management
Figure
4-5. Create a
ZTE Proprietary and Confidential