Zte ZXR10 2900E series Configuration Manual page 164

ZXR10 2900E Series Configuration Guide
Configurations on switch B:
/*Run the following commands to configure the spanning tree instance.*/
Switch_B(config)#set stp enable
Switch_B(config)#set stp forceversion mstp
Switch_B(config)#set stp instance 1 add vlan 100-110
/*Run the following command to configure the ZESR domain with VLAN 4000 as
the control VLAN and protection instance 1 as the protection instance.*/
Switch_B(config)#set zesr ctrl-vlan 4000 protect-instance 1
/*Run the following command to configure switch B as the transit node of the
primary ring with port 1/1 as its primary port and port 1/2 as its
secondary port.*/
Switch_B(config)#set zesr ctrl-vlan 4000 major-level role transit
primary-port 1/1 secondary-port 1/2
/*Run the following command to configure switch B as the edge assistant
node of the secondary ring Level1Seg1 with port 1/3 as its boundary port.*/
Switch_A(config)#set zesr ctrl-vlan 4000 level 1 seg 1 role edge-assistant port 1/3
Configurations on switch C:
/*Run the following commands to configure the spanning tree instance.*/
Switch_C(config)#set stp enable
Switch_C(config)#set stp forceversion mstp
Switch_C(config)#set stp instance 1 add vlan 100-110
/*Run the following command to configure the ZESR domain with VLAN 4000 as
the control VLAN and protection instance 1 as the protection instance.*/
Switch_C(config)#set zesr ctrl-vlan 4000 protect-instance 1
/*Run the following command to configure switch C as the transit node of the
primary ring with port 1/1 as its primary port and port 1/2 as its
secondary port.*/
Switch_C(config)#set zesr ctrl-vlan 4000 major-level role transit
primary-port 1/1 secondary-port 1/2
Configurations on switch D:
/*Run the following commands to configure the spanning tree instance.*/
Switch_D(config)#set stp enable
Switch_D(config)#set stp forceversion mstp
Switch_D(config)#set stp instance 1 add vlan 100-110t
/*Run the following command to configure the ZESR domain with VLAN 4000 as
the control VLAN and protection instance 1 as the protection instance.*/
Switch_D(config)#set zesr ctrl-vlan 4000 protect-instance
5-116
SJ-20130731155059-002|2013-11-27 (R1.0) ZTE Proprietary and Confidential