Garp/Gvrp Configuration - Zte ZXR10 2900E series Configuration Manual

5.26 GARP/GVRP Configuration

GARP/GVRP Overview
The Generic Attribute Registration Protocol (GARP) is a type of generic attribute
registration protocol, which distributes VLAN and multicast MAC address dynamically to
the member in the same switching network by applying the different application protocols.
GARP VLAN Registration Protocol (GVRP) is a type of application protocol defined
by the GARP, which maintains VLAN information in the switch dynamically based
on the GARP protocol mechanism.
VLAN registration information from other switches and update local VLAN registration
information dynamically including the current VLAN on this switch and the ports in
this VLAN. All switches supporting GVRP can broadcast the local VLAN registration
information to other switches, so that, the VLAN configurations of all devices with the
GVRP in the same switching network have a consistent interworking according to the
demand.
Configuring GARP/GVRP
The GARP/GVRP configuration includes the following commands:
Command
zte(cfg)#
trunk <trunklist>}
zte(cfg)#
zte(cfg)#
show garp (all configuration modes)
zte(cfg)#
zte(cfg)#
disable}
zte(cfg)#
{normal | fixed | forbidden}
show gvrp (all configuration modes)
GARP/GVRP Configuration Instance
l
Configuration Description
Switch A connects with switch B through port 1. By configuring GVRP, the two
switches can register each other and refresh their VLAN table. See
SJ-20130731155059-002|2013-11-27 (R1.0)
set vlan <vlanlist>{permit | forbid}{port <portlist>|
set garp {enable | disable}
set garp timer {hold | join | leave | learvall}<timer_value>
set gvrp {enable | disable}
set gvrp {port <portlist>| trunk <trunklist>}{enable |
set gvrp {port <portlist>| trunk <trunklist>} registration
Chapter 5 Service Configuration
All switches supporting GVRP can receive the
5-93
ZTE Proprietary and Confidential
Function
Permits or forbids adding/deleting
port/trunk in the specified VLAN.
Enables or disables the GARP
function.
Sets various GARP timers.
Displays GARP configuration.
Enables or disables GVRP.
Enables or disables GVRP on the
port/trunk.
Sets GVRP registration type on
Trunk port.
Displays GVRP configuration and
state.
Figure 5-30.