Figure 5-2 Port Mirroring Configuration Instance - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#
<portlist>{ingress | egress}
zte(cfg)#
<1-28>{ingress | egress| rspan}
zte(cfg)#
<0-7>{ingress | egress}
zte(cfg)#
egress}
zte(cfg)#
show mirror [session <1-3>] (all configuration modes)
show mirror rspan (all configuration modes)
show mirror statistical (all configuration modes)
Port Mirroring Configuration Instance
l
Configuration Description
This instance describes how to configure port mirroring on a switch, and port 2 can
monitor the packets on port 1, see

Figure 5-2 Port Mirroring Configuration Instance

l
Configuration Procedure
1. The following example describes how to set port mirroring in ingress direction.
zte(cfg)#set mirror session 1 add source-port 1 ingress
zte(cfg)#set mirror session 1 add dest-port 2 ingress
zte(cfg)#set mirror statistical sample-interval 100 ingress
/*set the port sample-interval of mirror statistic*/
zte(cfg)#set mirror rspan-tag vlan-id 100 priority 7 ingress
/*set VLAN tag added after port mirroring*/
SJ-20130731155059-002|2013-11-27 (R1.0)
set mirror session <1-3> delete source-port
set mirror session <1-3> delete dest-port
set mirror rspan-tag vlan-id <1-4094> priority
set mirror statistic sample-interval <1-2047>{ingress |
clear mirror session <1-3>
Figure 5-2.
5-12
ZTE Proprietary and Confidential
Function
Deletes an egress or ingress
monitoring port according to the
session.
Deletes an egress or ingress
monitoring (destination) port
according to the session.
Sets RSPAN tag format including
VLAN-ID and priority.
Sets ingress or egress port
mirroring sample frequency.
Clears the configuration of mirror
in the session .
Displays the configuration
information of mirror session.
Displays the ingress or egress
RSPAN configuration information.
Displays ingress or egress
sample frequency configuration
information.