Zte ZXR10 2900E series Configuration Manual page 133

Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
llc | snap}<0xHHHH> vlan <1-4094>
zte(cfg)#
zte(cfg)#
zte(cfg)#
show vlan [<vlanlist>] (all configuration modes)
show vlan protocol-mapping (all configuration modes)
VLAN Configuration Example One
l
Configuration Description
Configure VLAN 100. Add untagged ports 1 and 2 and tagged ports 7 and 8. The
detailed configuration is as follows:
Note:
By default, VLAN1 is enabled, all ports are in VLAN1 and in untag mode.
l
Configuration Procedure
zte(cfg)#set vlan 100 add port 1, 2 untag
zte(cfg)#set vlan 100 add port 7, 8 tag
zte(cfg)#set port 1, 2 pvid 100
zte(cfg)#set vlan 100 enable
l Configuration Verification
zte(cfg)#show vlan 100
VlanId
VlanName:
VlanMode:
Tagged ports
SJ-20130731155059-002|2013-11-27 (R1.0)
set vlan <vlanlist> add trunk <trunklist>[tag | untag]
set vlan <vlanlist> delete trunk <trunklist>
set port <portlist> protocol-vlan {enable | disable}
set vlan protocol-mapping session-no <1-8>{ethernet2 |
create vlan <1-4094> name <name>
clear vlan <vlanlist> name
clear vlan protocol-mapping session-no <1-8>
: 100 VlanStatus: enabled
Static
: 7-8
Chapter 5 Service Configuration
5-85
ZTE Proprietary and Confidential
Function
Adds a trunk to a VLAN and
configures the trunk location in the
VLAN.
Deletes a trunk from a VLAN.
Enables or disables the protocol
VLAN function.
Sets a protocol VLAN template.
Creates a VLAN name.
Clears a VLAN name.
Clears the VLAN template
configuration of the protocol.
Displays the basic VLAN
information.
Displays the VLAN configuration
of the protocol.