Zte ZXR10 2900E series Configuration Manual page 33

Chapter 4
System Management
Table of Contents
File System Management...........................................................................................4-1
Configuring the TFTP Server......................................................................................4-3
Configuring the FTP Server ........................................................................................4-4
Importing and Exporting the Configuration File ...........................................................4-7
Backing Up and Recovering Files...............................................................................4-7
Downloading the Software Version Automatically .......................................................4-8
Configuring Automatic Saving of a Configuration File ...............................................4-10
Upgrading the Software Version ...............................................................................4-11
File System Configuration Commands......................................................................4-15
4.1 File System Management
In the ZXR10 2900E, the Flash memory is the major storage device. Both the version file
and configuration file of the switch are saved in the Flash memory. Operations, such as
version upgrade and configuration saving, should be conducted in the Flash memory.
l The name of the version file is zImage. By default, it is saved in the /img directory.
l
The name of the configuration file is startrun.dat. By default, it is saved in the
/cfg directory.
The ZXR10 2900E supports backing up and restoring versions and configuration files
through TFTP, FTP and SFTP. For SFTP configuration and operation, refer to
When the zImage file is downloaded or uploaded), or when the zImage_bak file is
restored to the ZXR10 2900E, CRC is performed after file transmission is completed. If a
file does not pass the check, the file is deleted.
Directory Management
The file system can be used to create and delete directories, display the current working
directory, and display the information about subdirectories or files under a specified
directory.
For the procedure to manage file system directories, refer to the table below:
Step
1
2
SJ-20130731155059-002|2013-11-27 (R1.0)
Command
config tffs
zte(cfg)#
md <directory name>
zte(cfg-tffs)#
4-1
ZTE Proprietary and Confidential
6.2 SSH.
Function
Enters file system
configuration mode.
Creates a directory.