Figure 5-34 Vbas Typical Network - Zte ZXR10 2900E series Configuration Manual

Port connecting to user network is called cascade port and port connecting to BAS server
is called trust port. For the typical network of VBAS, see

Figure 5-34 VBAS Typical Network

Configuring VBAS
The VBAS configuration includes the following commands:
Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
show vbas (all configuration modes)
VBAS Configuration Instance
l
Configuration Description
See Figure
cascade port as port 2, trust port of switch B as port 1.
SJ-20130731155059-002|2013-11-27 (R1.0)
set vbas trust-port <portlist>{enable | disable}
set vbas cascade-port <portlist>{enable | disable}
set vbas {enable | disable}
5-35, this example describes how to set trust port of switch A as port 1,
Chapter 5 Service Configuration
5-105
ZTE Proprietary and Confidential
Figure 5-34.
Function
Enables or disables the global
VBAS trust-port.
Enables or disables the cascade
port VBAS function.
Enables or disables the global
VBAS function.
Displays the VBAS configuration.