Zte ZXR10 2900E series Configuration Manual page 58

ZXR10 2900E Series Configuration Guide
Command
show poe device (all configuration modes)
show poe status [port <portlist>] (all configuration modes)
show poe config [port <portlist>] (all configuration modes)
PoE Configuration Instance
l
Configuration Description
A DUT device is directly connected to a PD.
Configure a power supply device of PS type.
2918E-PS and ZXR10 2928E-PS can be used as a power supply. Take ZXR10
2918E-PS as an example. It provides 15.4 watts of power supply complying with AF
standard for 16 ports, and provides about 13 watts of power to each PD.
l Configuration Procedure
zte(cfg)#set poe port 1-16 pd-max-power 15.4
zte(cfg)#set poe port 1-16 priority low
zte(cfg)#set poe port 1-16 enable
l
Configuration Verification
zte(cfg)#show poe status port 12
port: 12
power up
power device
power device type
802.3af classification
current-power
avgerage-power
peak-power
zte(cfg)#show poe status port 13
port: 13
power up
power device
power device type
802.3af classification
current-power
avgerage-power
peak-power
zte(cfg)#show poe device
PSE firmware version
PSE max power
SJ-20130731155059-002|2013-11-27 (R1.0)
: on
: delivering power
: standard power device
: class 0
: 12.9 watt
: 12.9 watt
: 13.0 watt
: on
: delivering power
: standard power device
: class 0
: 13.2 watt
: 13.2 watt
: 13.2 watt
: ZTE 3.3
: 250 watt
5-10
Function
Displays the PoE status of the
device.
Displays the PoE status of the
port.
Displays PoE configuration
information.
The ZXR10 2910E-PS, ZXR10
ZTE Proprietary and Confidential