Figure 6-17 Changeover Rules Of Roles - Zte ZXR10 2900E series Configuration Manual

Figure 6-17 Changeover Rules of Roles

ZGMP Configuration
The ZGMP configuration includes the following commands:
Command
zte(cfg-group)#
zte(cfg-group)#
<trunklist>}{enable | disable}
zte(cfg-group)#
zte(cfg-group)#
show zdp (all configuration modes)
show zdp neighbour (all configuration modes)
show zdp neighbour detail (all configuration modes)
zte(cfg-group)#
zte(cfg-group)#
<trunklist>}{enable | disable}
zte(cfg-group)#
SJ-20130731155059-002|2013-11-27 (R1.0)
set zdp {enable | disable}
set zdp {port <portlist>| trunk
set zdp timer <5-255>
set zdp holdtime <10-255>
set ztp {enable | disable}
set ztp {port <portlist>| trunk
set ztp vlan <1-4094>
6-23
Chapter 6 Management
Function
Enables or disables the ZTE
Discovery Protocol (ZDP) function.
Enables or disables the ZDP
function based on port/trunk.
Sets a time interval for sending
ZDP packets.
Sets ZDP hold time.
Displays ZDP global configuration.
Displays ZDP neighbor
information.
Displays detailed ZDP neighbor
information.
Enables or disables the global ZTE
Topology Protocol (ZTP) function.
Enables or disables the ZTP
function based on port/trunk.
Sets a VLAN for collecting
topology information.
ZTE Proprietary and Confidential