Figure 6-7 Winscp Login Dialog Box-Creating A Session - Zte ZXR10 2900E series Configuration Manual

Configure the PC:
Before logging in to the switch through an SFTP client, set the client on the PC.
Different types of client software provide different SSH and SFTP supports, so the
settings vary. It is recommended that you use SFTP client software such as WinSCP
and Secure FX. WinSCP is SSH open-source graphic SFTP client software operating
in the Windows operating system. The following procedure uses WinSCP as an
example to describe the settings.
1. Set the IP address and port number for the SSH server. SFTP uses port 22. Set
a username and password. See
Figure 6-7 WinSCP Login Dialog Box—Creating a Session
2. From the left navigation tree, select Environment > SFTP, and then set the
parameters (you can use the default settings), see
SJ-20130731155059-002|2013-11-27 (R1.0)
Figure 6-7.
6-7
ZTE Proprietary and Confidential
Chapter 6 Management
Figure 6-8.