Figure 5-9 Stp Configuration Instance - Zte ZXR10 2900E series Configuration Manual

Figure 5-9 STP Configuration Instance

l
Configuration Procedure
zte(cfg)#set stp enable
/*enable the stp protocol of switch1 and switch2*/
zte(cfg)#set stp forceversion stp
/*set STP forceversion as stp*/
l
Configuration Verification
1. Check the STP state of switch 1 in the system view.
zte(cfg)#show stp instance
2. Check the STP state of switch 2 in the system view.
zte(cfg)#show stp instance
Reg
SJ-20130731155059-002|2013-11-27 (R1.0)
Spanning tree enabled protocol stp
RootID:
Priority : 32768
HelloTime(s) : 2
ForwardDelay(s): 15
Reg RootID:
Priority : 32768
RemainHops : 20
BridgeID:
Priority : 32768
HelloTime(s) : 2
ForwardDelay(s): 15
Interface PortId Cost
--------- ------ ------- ------- ---------- ----- -----------
1 128.1 200000
2 128.2 200000
Spanning tree enabled protocol stp
RootID:
Priority : 32768
HelloTime(s) : 2
ForwardDelay(s):15
RootID:
Priority : 32768
RemainHops : 20
BridgeID:
Priority : 32768
HelloTime(s) : 2
ForwardDelay(s): 15
Interface PortId Cost
--------- ------ ------- ------- ---------- ----- -----------
Chapter 5 Service Configuration
Address : 00.d0.d0.02.00.54
MaxAge(s): 20
Address : 00.d0.d0.02.00.54
Address : 00.d0.d0.02.00.54
MaxAge(s): 20
MaxHops : 20
Status Role Bound GuardStatus
Forward Designated SSTP
Forward Designated SSTP
Address : 00.d0.d0.02.00.54
MaxAge(s): 20
Address : 00.d0.d0.29.52.06
Address : 00.d0.d0.29.52.06
MaxAge(s): 20
MaxHops : 20
Status Role Bound GuardStatus
5-39
ZTE Proprietary and Confidential
None
None