Zte ZXR10 2900E series Configuration Manual page 232

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#
show remote-access (all configuration modes)
Remote-Access Configuration Instance 1
l Configuration Description
Only allow the network management user to access the switch from 192.168.1.0/24
through Telnet, SSH, SNMP, and Web.
l Configuration Procedure
zte(cfg)#set remote-access specific
zte(cfg)#set remote-access ipaddress 192.168.1.0 255.255.255.0
zte(cfg)#show remote-access
Whether check remote manage address: YES
Allowable remote manage address(es) and application(s):
192.168.1.0/255.255.255.0
Remote-Access Configuration Instance 2
l
Configuration Description
Only allow the network management user to access the switch from 192.168.1.1
through Telnet, SSH, SNMP, and Web.
l
Configuration Procedure
zte(cfg)#set remote-access specific
zte(cfg)#set remote-access ipaddress 192.168.1.1
zte(cfg)#show remote-access
Whether check remote manage address: YES
Allowable remote manage address(es) and application(s):
192.168.1.1/255.255.255.255
Remote-Access Configuration Instance 3
l
Configuration Description
Only allow the network management user to access the switch from 192.168.1.1
through Telnet and SSH.
l
Configuration Procedure
zte(cfg)#set remote-access specific
zte(cfg)#set remote-access ipaddress 192.168.1.1
zte(cfg)#show remote-access
Whether check remote manage address: YES
Allowable remote manage address(es) and application(s):
SJ-20130731155059-002|2013-11-27 (R1.0)
clear remote-access ipaddress <A.B.C.D>[<A.B.C.D>]
snmp, telnet, ssh, web
snmp, telnet, ssh, web
6-2
ZTE Proprietary and Confidential
Function
Deletes the configuration of a
specified IP address and network
segment.
Displays the configuration
information of Remote-Access.