Connection Modes; Ftp Connection Configurations; Figure 1-1 Zxr10 5900E's Configuration Methods - Zte ZXR10 5900E Series Configuration Manual

Chapter 1
Usage and Operation
Table of Contents

Connection Modes .....................................................................................................1-1

Command Modes .....................................................................................................1-23
Online Help ..............................................................................................................1-25
Command History ....................................................................................................1-27
1.1 Connection Modes
The ZXR10 5900E supports several connection modes, see

Figure 1-1 ZXR10 5900E's Configuration Methods

Users can use different connection modes based on the network type. The connection
modes are as follows:
l
Console port: the primary mode for users to configure the ZXR10 5900E.
l
Telnet/SSH
in the network.
l
NM workstation mode: If this mode is used, the corresponding NM software supporting
SNMP
l
TFTP/FTP
the ZXR10 5900E's configuration.

1.1.1 FTP Connection Configurations

The use of FTP is to improve the degree of sharing files by using a remote PC, which makes
the storage medium transparent for users and transports data reliably and efficiently.
Figure 1-2
192.168.65.2/24, and the IP address of switch B is 192.168.65.5/24.
SJ-20150114102049-002|2015-01-15 (R1.0)
mode: allows users to configure the ZXR10 5900E at any reachable place
is required
mode: allows users to download or upload the configuration file to update
shows the network scenario for an FTP server. The IP address of switch A is
1-1
ZTE Proprietary and Confidential
Figure 1-1.