Common Command Parameters; Table 3-2 Common Command Parameters - Zte ZXR10 2900E series Configuration Manual

In Mac-Based-Vlan configuration mode, you can add or delete rules for a specified session.
To return to global configuration mode from Mac-Based-Vlan configuration mode, run the
exit command or press Ctrl+Z.
User-Defined Ingress ACL Configuration Mode
In global configuration mode, you can run the config ingress-acl user-define number <801-
828> command to enter user-defined ingress ACL configuration mode, which is shown as
follows:
zte(cfg)#config ingress-acl user-define number 811
zte(ingress-user-define-acl)#
In user-defined ingress ACL configuration mode, you can add, delete, or move the rules
of ACLs with the specified ACL numbers.
To return to global configuration mode from user-defined ingress ACL configuration mode,
run the exit command or press Ctrl+Z.

3.3 Common Command Parameters

For common command parameters of the ZXR10 2900E, refer to

Table 3-2 Common Command Parameters

Parameter
<portlist>
<vlanlist>
<trunklist>
<portname>
<vlanname>
<trunkid>
SJ-20130731155059-002|2013-11-27 (R1.0)
Description
Port number, port name or port number range separated by a
comma, for example:
l
1, 2, 4-8, 18
l
p1, pp2, 4-8, port18
The p1, pp2, port18 are port names created by users.
Slot ID is added before the port ID of the devices supporting
subcards. For example, for the ZXR10 2928E-PS device, the
port list is as follows:
l 1/1, 1/2, 1/4-8, 1/18
l 2/1, 2/2
VLAN ID, VLAN name or VLAN range separated by a comma,
for example:
l 1-19,77,88,100-900
l vlan1,v1,10,100-200
Trunk ID or trunk range separated by a comma, for example,
1-5, 7, 10.
One port number or port name can be entered once.
One VLAN ID or VLAN name can be entered once.
One trunk ID can be entered once.
3-11
ZTE Proprietary and Confidential
Chapter 3 Usage and Operation
Table 3-2.