Rmon - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
number of sent entries is 50. If the number of changed MAC entries does not reach
50 within one minute, the switch sends trap information when one minute expires.
The number of sent entries is less than or equal to 50. By default, the MAC change
notification function is disabled. So, if the MAC change notification function is enabled
globally but it is not enabled on a port, the network management server cannot receive
trap information. In this example, if the MAC entries change on another port instead
of Port 1, trap information is not sent.

6.5 RMON

RMON Overview
The Remote Monitoring (RMON) defines the standard network monitoring function and a
communication interface between the management console and the remote monitor. The
RMON offers an efficient method to monitor the behaviors of subnets while reducing the
load of other agents and management stations.
The RMON specifications refer to the definition of RMON MIB. The ZXR10 2900E supports
four groups of RMON MIB.
l
History: records the periodic statistics sample of the information that can be obtained
from the statistics group.
l
Statistics: maintains the basic application and error statistics of each subnet that the
agent monitors.
l Event: a table related to all events generated by RMON agents.
l Alarm: allows operators of the management console to set sampling interval and
alarm threshold for any count or integer recorded by RMON agents.
All these groups are used to store the data collected by the monitor and derived data and
statistics data. The alarm group is based on the implementation of the event group. These
data can be obtained through the MIB browser.
The RMON control information can be configured through the MIB browser, or
HyperTerminal or remote Telnet command lines. The RMON sampling information and
statistics data is obtained through the MIB browser.
RMON Configuration
The RMON configuration includes the following commands:
Command
zte(cfg-snmp)#
zte(cfg-snmp)#
owner <name>| status {valid | underCreation | createRequest
| invalid}}
SJ-20130731155059-002|2013-11-27 (R1.0)
set rmon {enable | disable}
set statistics <1-65535>{datasource <1-28>|
6-18
Function
Enables or disables the RMON
function.
Sets a statistics group.
ZTE Proprietary and Confidential