Figure 5-13 Qos Configuration Instance - Zte ZXR10 2900E series Configuration Manual

Command
show qos policer-counter [<0-383>] (all configuration modes)
show policy [mirror | redirect | statistics | policing [<0-383>]|
vlan-remark | remark | harddrop] (all configuration modes)
zte(cfg)#
QoS Configuration Instance
l
Configuration Description
Use the 2928E as an example, set the uplink bandwidth of all the user-interface to 2
Mbps. The uplink bandwidth of the switch is 20 Mbps. The uplink port is port 26 and
the client PC accesses the network through port 24. See

Figure 5-13 QoS Configuration Instance

l
Configuration Procedure
zte(cfg)#set qos traffic-limit fe-port 1 data-rate 2000
zte(cfg)#set qos traffic-limit fe-port 2 data-rate 2000
/*Omitted*/
zte(cfg)#set qos traffic-limit fe-port 24 data-rate 2000
zte(cfg)#set qos traffic-shaping ge-port 26 data-rate 20 burst-size 10
l
Configuration Verification
zte(cfg)#show qos traffic-shaping port 26
Port Egress Traffic Shaping Table:
Port ID : 26
Port Shaping Rate (Kbps)
Queue 0 Shaping Rate (Kbps) : No-Limit
Queue 1 Shaping Rate (Kbps) : No-Limit
SJ-20130731155059-002|2013-11-27 (R1.0)
set icmp protect {enable|disable}
Chapter 5 Service Configuration
: 20000 The Burst Size
The Burst Size
The Burst Size
5-59
ZTE Proprietary and Confidential
Function
Displays the flow policer statistics
value.
Displays various binding
configuration of the specified
flow.
Sets the ICMP protection function.
Figure 5-13.
: 10
: N/A
: N/A