Figure 5-39 Transmission Link Fault Diagram - Zte ZXR10 2900E series Configuration Manual

Figure 5-39 Transmission Link Fault Diagram

Configuring ZESR
The ZESR configuration includes the following commands:
Step Command
1
ZXR10(config)#
protect-instance <1-16>
2
ZXR10(config)#
id> major-level role {master | transit |
zess-master | zess-transit}{primary-port <port1>|
primary-trunk <trunkId>}{secondary-port
<port2>| secondary-trunk <trunkId>}
ZXR10(config)#
level <1-2> seg <1-10> role {master |
transit}{primary-port <port1>| primary-trunk
<trunkId>}{secondary-port <port2>|
secondary-trunk <trunkId>}
SJ-20130731155059-002|2013-11-27 (R1.0)
set zesr ctrl-vlan <1-4094>
set zesr ctrl-vlan <cvlan
set zesr ctrl-vlan <1-4094>
5-111
Chapter 5 Service Configuration
Function
Create a ZESR domain.
The control VLAN of a ZESR domain
cannot be a service VLAN. It cannot
have any conflict with a service VLAN
or a Network Management VLAN. The
PVID of a port cannot be used as the
control VLAN.
Configures a node as the node on the
primary ring.
Configures a node as the master node
or a transit node on a secondary ring.
ZTE Proprietary and Confidential