Zte ZXR10 2900E series Configuration Manual page 244

ZXR10 2900E Series Configuration Guide
Command
zte(cfg-snmp)#
zte(cfg-snmp)#
zte(cfg-snmp)#
private}[ingress-acl-basic-number <1-99>]
zte(cfg-snmp)#
exclude}<mib-oid>]
zte(cfg-snmp)#
zte(cfg-snmp)#
mber <1-99>
zte(cfg-snmp)#
umber
zte(cfg-snmp)#
zte(cfg-snmp)#
<string>| v3 <string>{auth | noauth | priv}}
zte(cfg-snmp)#
<string>{auth | noauth | priv}}
zte(cfg-snmp)#
| coldstart | warmstart | topologychange | memberupdown
| portloopdetect | trunkloopdetect | linkMonitorStatus |
remoteLinkStatus | dyingGaspStatus | remoteDiscovery |
powerDown | dhcpCharCheck | cpuUserationThreshold |
memUserationThreshold | fanStatusCheck | macNotification |
udldUnidirectional | protocolProtect | dismanpingnotifications|
adminPasswordNoChange | arpOverload | bootfileLost
| cfmFaultAlarm | fanSpeed | fileTransfer | ipConflict |
MacOverload | poe | StpBridgeRoleChange | StpPortStateChange
| trafficLimitProtect | trafficLimit | temperature | all}{enable |
disable}
SJ-20130731155059-002|2013-11-27 (R1.0)
set recvpacket <0-100>
set src-ipport <0-63>
create community <string>{public |
create view < string >[{include |
set community <string> view <string>
set community <string> ingress-acl-basic-nu
clear community <string> ingress-acl-basic-n
set mib1493compatible {enable | disable}
set host <A.B.C.D> trap {v1 <string>| v2c
set host <A.B.C.D> inform { v2c <string>| v3
set trap {linkdown | linkup | authenticationfail
6-14
Function
Sets the number of SNMP
messages that the SNMP protocol
stack can handle in a unit time.
Sets the source IP address of
SNMP.
Creates a community, sets the
access authority, and binds a basic
ACL ID with the community.
Creates a view and specifies
whether the view includes a MIB
subtree.
Sets a community and a view
containing the community name.
Sets the basic ACL ID bound to
the specified community.
Deletes the basic ACL ID bound to
the specified community.
Enables or disables the 1493
compatible mode.
Sets the IP address, community
name, username, version, and
security level of the computer
receiving trap information.
Sets the IP address, community
name, username, version, and
security level of the computer
receiving inform messages.
Enables/disables trap functions
of link connection/disconnection,
authentication failure, cool/hot
startup, topology change,
cluster member UP/DOWN,
loop detected at port/Trunk,
MAC number exceeding the
threshold, link monitor event
alarm, remote link event alarm,
event detection alarms, MAC
list change notification, and ping
notification.
ZTE Proprietary and Confidential