Zte ZXR10 2900E series Configuration Manual page 103

Command
zte(cfg)#
ority {red | yellow | green}| dscp-priority <0-63>| user-priority
<0-7>| traffic-class <0-7>}
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
default}
zte(cfg)#
-255><0-255><0-255><0-255><0-255><0-255>[single-wrrgroup]
zte(cfg)#
zte(cfg)#
<0-100000>| disable}
zte(cfg)#
<0-148810>[packet-lenth <64-10240>]| disable}
zte(cfg)#
| known-uc | multicast | tcp-syn | unknown-uc}{enable | disable}
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
<32-1000000>| disable}
SJ-20130731155059-002|2013-11-27 (R1.0)
set qos priority-mapping qos-profile <0-127>{drop-pri
set qos priority-mapping qos-profile default
set qos queue-schedule enhance {disable| enable}
set qos queue-schedule mode {byte | packet}
set qos queue-schedule port <1-28>{session <1-7>|
set qos queue-schedule session <1-7><0-255><0-255><0
set qos traffic-limit mode {byte|packet}
set qos traffic-limit fe-port <1-24>{data-rate
set qos traffic-limit fe-port <1-24>{packet-rate
set qos traffic-limit port <1-28> packet-type {broadcast
set qos traffic-limit port <1-28> percent <1-100>
set qos traffic-limit port <1-28> protect {enable|disable}
set qos traffic-limit port <1-28> protect time <1-10>
set qos traffic-limit port <1-28> trap {enable | disable}
set qos traffic-limit ge-port <25-28>{data-rate
Chapter 5 Service Configuration
5-55
ZTE Proprietary and Confidential
Function
Sets the QoS profile template.
Sets 128 QoS profiles to recover
default values.
Sets the optimized queue
scheduling mode.
Sets the QoS queue scheduling
unit.
Sets the scheduling policy of each
queue of the port.
Sets scheduling policy template.
Sets the speed limit mode of the
global Ingress port.
Sets 100 M port ingress rate
limit, in which <0-100000> is the
maximum of data transmission
rate.
Sets 100 M port ingress rate
limit, in which <0-148810> is the
maximum of packet transmission
rate.
Sets the packet type that the rate
limit function limits.
Sets the ingress rate limit based
on the port bandwidth percentage.
Sets the port rate limiting function.
Sets the port shutdown time
when the port rate limit function is
enabled.
Enables or disables the trap
function for a port.
Sets 1000 M port ingress rate
limit, in which, <32-100000> is the
maximum of data transmission
rate.