Table 6-1 Zxr10 2900E Port Indicator Descriptions - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
For a description of the port indicators on the ZXR10 2900E, refer to

Table 6-1 ZXR10 2900E Port Indicator Descriptions

Indicator
LINK
SPD
DUP
STA
CPU%
MEM%
↑BW%
SJ-20130731155059-002|2013-11-27 (R1.0)
State
Off
On (green)
Flashing (green)
On (green)
On (yellow)
On (green)
On (yellow)
On (green)
On (yellow)
Off
On (green)
On (green)
On (green)
6-50
Description
No link.
Indicator for the physical link on an optical port.
After the system is started, a physical link is
established.
Indicator for data sending and receiving a
the port. When data is sent or received, the
indicator flashes at the fixed frequency.
The port speed is the same as the default port
speed.
The port speed is not the same as the default
port speed.
The port is in full-duplex mode.
The port is in half-duplex mode.
The STP status of the port is Forward.
In other statuses.
The STP status of the port is Disable.
A port indicator displays the current CPU
usage.
For the 2910E-PS, the first 8 ports display
the current usage, each of which represents
12.5%. For other devices, the first 10 ports
display the current usage, each of which
represents 10%.
In this mode, a port indicator displays the
current memory usage.
For the 2910E-PS, the first 8 ports display
the current usage, each of which represents
12.5%. For other devices, the first 10 ports
display the current usage, each of which
represents 10%.
In this mode, a port indicator displays the
current occupation rate of uplink port outbound
bandwidth. The current speed on the uplink
interface is used as the base.
ZTE Proprietary and Confidential
Table 6-1.