Chapter 3 Usage And Operation; Figure 3-4 Com1 Properties Dialog Box; Table 3-1 Configuration Command - Zte ZXR10 2900E series Configuration Manual

Figure 3-4 COM1 Properties Dialog Box

5. Click the OK button. After the ZXR10 2900E is powered on, enter the configuration
mode for further operations.
Configuration Through Telnet
The Telnet mode is often used for configuring a remote switch. A user can log in to a
remote switch through an Ethernet port of the local computer. The login username and
password for the switch must be configured and the IP address of the layer-3 port on the
switch can be pinged successfully from the local computer, refer to
For configuration of the IP address of the layer-3 port, refer to
Configuration

Table 3-1 Configuration Command

Command
create user <name>{admin | guest}[<0-15>]
set user local <name> login-password [<string>]
set user {local | radius| tacacs-plus}<name>
admin-password <string>
SJ-20130731155059-002|2013-11-27 (R1.0)
and 5.16 IPv6 Layer 3

Chapter 3 Usage and Operation

Configuration.
Function
Create a new user, The user <name> parameter
value consists of at most 15 characters.
Set the login password, The login-password
<string> parameter value consists of at most 16
characters.
Set the administrator password, The
admin-password <string> parameter value
consists of at most 16 characters.
3-3
ZTE Proprietary and Confidential
Table 3-1.
5.15 IPv4 Layer 3