Zte ZXR10 2900E series Configuration Manual page 79

Command
zte(cfg-nas)#
{name <channel-group-name>| id-list <channel-group-list>}{deny |
order | preview | query}
show iptv channel-group [name <channe-groupl-name>| id
<channel-group-id>] (all configuration modes)
IPTV Configuration Example One
l
Configuration Description
Port 1 connects to the user and it subscribes to channel 225.1.1.1. The user vlan
is 100. The multicast vlan is 4000. Router sends data stream of multicast group
225.1.1.1. PC sends request for entering into channel 225.1.1.1. See
Figure 5-6 IPTV Configuration Instance 1
l
Configuration Procedure
1. Configure VLAN
zte(cfg)#set vlan 100 add port 1
zte(cfg)#set vlan 4000 add port 1, 4
zte(cfg)#set vlan 100, 4000 enable
zte(cfg)#set port 1 pvid 100
zte(cfg)#set port 4 pvid 4000
/*IGMP Snooping*/
zte(cfg)#set igmp snooping enable
zte(cfg)#set igmp snooping add vlan 100, 4000
zte(cfg)#set igmp snooping fastleave enable
2. Configure IPTV
zte(cfg)#config nas
zte(cfg-nas)#iptv control enable
zte(cfg-nas)#iptv cac-rule enable
3. Configure a rule on the port
zte(cfg-nas)#iptv channel mvlan 4000 group 225.1.1.1
name CCTV1 id 1
zte(cfg-nas)#iptv port 1 service start
zte(cfg-nas)#iptv port 1 control-mode channel
zte(cfg-nas)#iptv port 1 channel id-list 1 order
zte(cfg-nas)#iptv port 1 add mvlan 4000 uvlan 100
l
Configuration Verification
SJ-20130731155059-002|2013-11-27 (R1.0)
iptv port <portlist>[vlan <1-4094>] channel-group
Chapter 5 Service Configuration
5-31
ZTE Proprietary and Confidential
Function
Allocates an access permission to
the channel group for users.
Displays channel group
information (details of one or
all channel groups).
Figure 5-6.