Zte ZXR10 2900E series Configuration Manual page 123

Command
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
.HH.HH>]
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
show dot1x (all configuration modes)
show client (all configuration modes)
SJ-20130731155059-002|2013-11-27 (R1.0)
dot1x re-authenticate {enable | disable}
dot1x re-authenticate period <1-4294967295>
dot1x quiet-period <0-65535>
dot1x tx-period <1-65535>
dot1x supplicant-timeout <1-65535>
dot1x server-timeout <1-65535>
dot1x max-request <1-10>
dot1x add vlan <1-4094>[mac <HH.HH.HH.HH
dot1x delete vlan <1-4094>
clear client
clear client index <0-255>
clear client {port <portlist>| vlan <vlanlist>}
Chapter 5 Service Configuration
5-75
ZTE Proprietary and Confidential
Function
Enables or disables
re-authentication function.
Sets the time interval for
re-authentication.
Sets quiet period of authentication.
Sets the time that the
authentication system needs
to wait before it can retransmit
the EAPOL data packet because
it does not receive the response
from the client.
Sets the time-out time for the
authentication system to receive
the data packets from the
authentication client system.
Sets the time-out time for the
authentication system to receive
the data packets from the
authentication server.
Sets the maximum times of
request retransmission when
the timer expires before the
authentication system receives
the Challenge response from the
client.
Sets the private MAC address that
DOT1X protocol can use.
Deletes the private MAC address
that DOT1X protocol can use.
Deletes all clients.
Clears the specified client.
Deletes the client end user of
specified port/VLAN.
Displays 802.1x configuration
information.
Displays the information of all
access users.