Zte ZXR10 2900E series Configuration Manual page 26

Easy-maintenance secure switch
Hide thumbs Also See for ZXR10 2900E series:
Table of Contents

Advertisement

ZXR10 2900E Series Configuration Guide
In basic egress ACL configuration mode, you can add, delete and move rules for a basic
egress ACL.
To return to global configuration mode from basic egress ACL configuration mode, run the
exit command or press Ctrl+Z.
Extended Egress ACL Configuration Mode
In global configuration mode, you can run the config egress-acl extend number <500-599>
command to enter extended egress ACL configuration mode, which is shown as follows:
zte(cfg)#config egress-acl extend number 500
zte(egress-extend-acl)#
In extended egress ACL configuration mode, you can add, delete and move rules for a
specified extended egress ACL.
To return to global configuration mode from extended egress ACL configuration mode, run
the exit command or press Ctrl+Z.
Layer-2 Egress ACL Configuration Mode
In global configuration mode, you can run the config egress-acl link number <600-699>
command to enter layer-2 egress ACL configuration mode, which is shown as follows:
zte(cfg)#config egress-acl link number 600
zte(egress-link-acl)#
In layer-2 egress ACL configuration mode, you can add, delete and move rules for a
specified layer-2 egress ACL.
To return to global configuration mode from layer-2 egress ACL configuration mode, run
the exit command or press Ctrl+Z.
Hybrid Egress ACL Configuration Mode
In global configuration mode, you can run the config egress-acl hybrid number <700-799>
command to enter hybrid egress ACL configuration mode, which is shown as follows:
zte(cfg)#config egress-acl hybrid number 700
zte(egress-hybrid-acl)#
In hybrid egress ACL configuration mode, you can add, delete and move rules for a
specified hybrid egress ACL.
To return to global configuration mode from hybrid egress ACL configuration mode, run
the exit command or press Ctrl+Z.
Mac-Based-Vlan Configuration Mode
In global configuration mode, you can run the config mac-based-vlan session <1-64>
command to enter Mac-Based-Vlan configuration mode, which is shown as follows:
zte(cfg)#config mac-based-vlan session 1
zte(mac-based-vlan)#
3-10
SJ-20130731155059-002|2013-11-27 (R1.0)
ZTE Proprietary and Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents