Usage Of Command Line - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
Parameter
<HH.HH.HH.HH.HH.HH>
<A.B.C.D>
<A.B.C.D/M>
<string>
<mib-oid>
<name>
<sessionlist>

3.4 Usage of Command Line

Online Help
In any command mode, enter a question mark (?) at the system prompt. A list of available
commands in the command mode will be displayed. You can also use the online help to
get keywords and parameters of any command.
1. In any command mode, enter a question mark "?" at the system prompt. A list of all
commands in the mode and a brief description of the commands are displayed. For
example,
zte>?
enable
exit
help
show
list
zte>
2. Enter a question mark (?) after a character or string. A list of commands or keywords
starting with the character or string is displayed. It is noted that there is no space
between the character (string) and the question mark. For example,
zte(cfg)#c?
cfm
zte(cfg)#c
3. Enter a question mark (?) after a command, keyword or parameter. The next keyword
or parameter to be entered is listed, and its brief description is also displayed. For
example,
zte(cfg)#config ?
egress-acl
group
ingress-acl
SJ-20130731155059-002|2013-11-27 (R1.0)
enable configure mode
exit from user mode
description of the interactive help system
show config information
print command list
clear config cpu-threshold
Description
MAC address, for example, 00.22.33.44.55.66.
IP address, for example, 10.40.47.254.
IP address and mask bits. M must be an integer from 1 to 32,
for example, 10.40.47.254/24.
String without spaces.
Dotted decimal numeral with a variable length, for example,
1.3.6.2.19.2.
String without spaces.
Session list.
createconfig
enter egress acl config mode
enter group management config mode
enter ingress acl config mode
3-12
ZTE Proprietary and Confidential
clear create