Figure 5-60 Dhcp Relay Configuration Instance - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
Command
show dhcp relay binding [port <1-28>| trunk <1-15>] (all
configuration modes)
show dhcp relay option82 port<1-28> (all configuration modes)
show dhcp relay option82 device (all configuration modes)
zte(cfg-router)#
<A.B.C.D>}
zte(cfg-router)#
<A.B.C.D>}
zte(cfg-router)#
zte(cfg-router)#
zte(cfg)#
show dhcp relay vlan (all configuration modes)
DHCP Configuration Instance
l
Configuration Description
See
connected to the DHCP server of the IP network.

Figure 5-60 DHCP Relay Configuration Instance

SJ-20130731155059-002|2013-11-27 (R1.0)
set ipport <0-63> dhcp relay {agent | server
clear ipport <0-63> dhcp relay {agent | server
set dhcp relay server <A.B.C.D>
set dhcp relay global-ipport <0-63>
set dhcp relay vlan{enable | disable}
Figure 5-60, switch port 1 is connected to the DHCP client, and switch port 2 is
5-162
ZTE Proprietary and Confidential
Function
Displays the DHCP relay binding
information.
Displays the DHCP relay option82
configuration of the port.
Displays device-related
information, including ANI
and remote-ID.
Sets the DHCP relay information
of ipport.
Clears the DHCP relay information
of ipport.
Sets a global DHCP server.
Sets a global ipport for a DHCP
relay.
Enables or disables the DHCP
relay function based on VLANs.
If the DHCP function is enabled
globally, the device provides
the relay function when either
this command or the relay agent
command is used.
Displays VLANs for which the
DHCP relay function is enabled.