Sflow Configuration - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
Remote Total Errored Frame Seconds Events : 0

5.34 sFlow Configuration

The sFlow configuration includes the following commands:
Command
zte(cfg)#
<1-65535>]
zte(cfg)#
<1-65535>]
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
off
zte(cfg)#
packet-sample on frequency <2-16000000>[time-range
<word>]
zte(cfg)#
zte(cfg)#
show sflow (all configuration modes)
SJ-20130731155059-002|2013-11-27 (R1.0)
Errored Seconds Threshold : 10(s)
Total Errored Frame Seconds : 0(s)
Local Total Errored Frame Seconds Events
set sflow agent-address <A.B.C.D>[udp-port
set sflow collector-address <A.B.C.D>[udp-port
set sflow version <number>
set sflow {ingress | egress}{enable | disable}
set sflow {ingress | egress} reload-mode { continue | cpu}
set sflow ingress sample-mode {all | forward}
set sflow {ingress | egress} port <portlist> packet-sample
set sflow {ingress | egress} port <portlist>
clear sflow config [{agent | collector}]
clear sflow statistic
: 0
5-132
ZTE Proprietary and Confidential
Function
Sets the IP address of an sFlow
agent.
Sets the IP address of an sFlow
collector.
Sets the format version of sFlow
sampling packets.
Enables or disables the sFlow
function on an ingress or an
egress.
Sets the reloading mode on an
sFlow ingress or egress.
Sets the sampling mode on an
sFlow ingress or egress.
Disables port-based sFlow
sampling.
Enables port-based sFlow
sampling or associates with a time
range.
Clears sFlow configuration on
ports.
Clears statistics information on
ports.
Displays all sFlow configuration.