Debug Module Configuration - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
/*The following command configures switch B to be a neighbor node in domain 1*/
/*and its port 1/2 to be an RPL port:*/
Switch_B(config)#set ERPS domain 1 ring-id 1 raps-vlan 4000 ring-east port 1/1
ring-west port 1/2 rpl-role neighbour rpl-port west
/*The following command configures switch B to be the owner node in domain 2*/
/*and its port 1/2 to be an RPL port:*/
Switch_B(config)#set ERPS domain 2 ring-id 2 raps-vlan 4001 ring-east port 1/1
ring-west port 1/2 rpl-role owner rpl-port west
The configuration on switch C is as follows:
/*The following commands configure a spanning tree instance:*/
Switch_C(config)#set stp enable
Switch_C(config)#set stp instance 1 add vlan 100-110
Switch_C(config)#set stp instance 2 add vlan 200-210
/*The following commands configure protection instance 1 for ERPS domain 1*/
/*and protection instance 2 for ERPS domain 2:*/
Switch_C(config)#set ERPS domain 1 protect-instance 1
Switch_C(config)#set ERPS domain 2 protect-instance 2
/*The following command configures switch C to be a none node in domain 1: */
Switch_C(config)#set ERPS domain 1 ring-id 1 raps-vlan 4000 ring-east port 1/1
ring-west port 1/2
/*The following command configures switch C to be a none node in domain 2:*/
Switch_C(config)#set ERPS domain 2 ring-id 2 raps-vlan 4001 ring-east port 1/1
ring-west port 1/2
The configuration on switch D is the same as that on switch C.

5.49 Debug Module Configuration

Introduction to the Debug Module
The Debug module is added for debugging the DHCP, dot1x, IP, ARP, and SNMP
protocols. This module configures the commands for locating faults in message sending
and receiving, message statistics, and procedure printing.
By using these commands, a user can easily trace the process of sending and receiving
messages, display statistical data of messages, and observe common printing errors.
Thus, the user can preliminarily position the faults, including protocol abnormality and
function failures.
SJ-20130731155059-002|2013-11-27 (R1.0)
5-178
ZTE Proprietary and Confidential