Figure 5-4 Network Topology Of Igmp Snooping Configuration Instance - Zte ZXR10 2900E series Configuration Manual

Command
zte(cfg)#
zte(cfg)#
cascade port <portlist>
IGMP Snooping Configuration Instance
l Configuration Description
Ports 1, 3, and 5 are connected to the host, port 10 is connected to the router, add
ports 10, 1, 3, and 5 to VLAN200, and users on ports 1, 3, and 5 send multicast
join request packets with multicast addresses 230.44.45.167 and 230.44.45.157
respectively. Add multicast filter group address 230.44.45.167 on VLAN200. The
IGMP Snooping function and IGMP Filter function are enabled and the snooping
results are displayed. See

Figure 5-4 Network Topology of IGMP Snooping Configuration Instance

l
Configuration Procedure
zte(cfg)#set vlan 200 add port 1, 3, 5, 10 untag
zte(cfg)#set port 1, 3, 5, 10 pvid 200
zte(cfg)#set vlan 200 enable
zte(cfg)#set igmp snooping enable
zte(cfg)#set igmp snooping add vlan 200
zte(cfg)#set igmp snooping vlan 200 add smr port 10
zte(cfg)#set igmp filter enable
zte(cfg)#set igmp filter add groupip 230.44.45.167 vlan 200
l
Configuration Verification
Display multicast listening and filtering result.
SJ-20130731155059-002|2013-11-27 (R1.0)
set igmp snooping multicast-ring {enable | disable}
set igmp snooping multicast-ring {add | delete}
Figure 5-4.
5-23
Chapter 5 Service Configuration
Function
Enables or disables the IGMP
multicast ring network function.
Adds or deletes cascaded ports in
a multicast ring network.
ZTE Proprietary and Confidential