Zte ZXR10 2900E series Configuration Manual page 25

Chapter 3 Usage and Operation
In extended ingress ACL configuration mode, you can add, delete and move rules for a
specified extended ingress ACL.
To return to global configuration mode from extended ingress ACL configuration mode, run
the exit command or press Ctrl+Z.
Layer-2 Ingress ACL Configuration Mode
In global configuration mode, you can run the config ingress-acl link number <200-299>
command to enter layer-2 ingress ACL configuration mode, which is shown as follows:
zte(cfg)#config ingress-acl link number 200
zte(ingress-link-acl)#
In layer-2 ingress ACL configuration mode, you can add, delete and move rules for a
specified layer-2 ingress ACL.
To return to global configuration mode from layer-2 ingress ACL configuration mode, run
the exit command or press Ctrl+Z.
Hybrid Ingress ACL Configuration Mode
In global configuration mode, you can run the config ingress-acl hybrid number <300-399>
command to enter hybrid ingress ACL configuration mode, which is shown as follows:
zte(cfg)#config ingress-acl hybrid number 333
zte(ingress-hybrid-acl)#
In hybrid ingress ACL configuration mode, you can add, delete and move rules for a
specified hybrid ingress ACL.
To return to global configuration mode from hybrid ingress ACL configuration mode, run
the exit command or press Ctrl+Z.
Global Ingress ACL Configuration Mode
In global configuration mode, you can run the config ingress-acl global command to enter
global ingress ACL configuration mode, which is shown as follows:
zte(cfg)#config ingress-acl global
zte(ingress-global-acl)#
In global ingress ACL configuration mode, you can add, delete and move rules for a
specified global ingress ACL.
To return to global configuration mode from global ingress ACL configuration mode, run
the exit command or press Ctrl+Z.
Basic Egress ACL Configuration Mode
In global configuration mode, you can run the config egress-acl basic number <400-499>
command to enter basic egress ACL configuration mode, which is shown as follows:
zte(cfg)#config egress-acl basic number 400
zte(egress-basic-acl)#
3-9
SJ-20130731155059-002|2013-11-27 (R1.0) ZTE Proprietary and Confidential