Port Configuration - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide

5.2 Port Configuration

Port Configuration Overview
The port parameters can be configured on the ZXR10 2900E. They include
auto-negotiation, duplex mode, rate and line detection. The commands include the
following types:
1. Port basic parameters configuration
2. Port diagnosis
3. Port information view
Configuring a Port
The port configuration includes the following commands:
Command
zte(cfg)#
zte(cfg)#
copper | auto [ prefer {first-up | fiber | copper}]}
zte(cfg)#
{1000base-x | sgmii}]}
zte(cfg)#
maxspeed
zte(cfg)#
{speed10 | speed100 | speed1000}{fullduplex |
halfduplex}
zte(cfg)#
auto}
zte(cfg)#
1000 | auto}
zte(cfg)#
| crossover}
zte(cfg)#
| disable}
zte(cfg)#
<string>
zte(cfg)#
untag | all}
zte(cfg)#
disable }
zte(cfg)#
SJ-20130731155059-002|2013-11-27 (R1.0)
set port <portlist>{enable | disable}
set port <portlist> work-mode {fiber |
set port <portlist> phy-mode
set port <portlist> speedadvertise
set port <portlist> speedadvertise
set port <portlist> duplex {full | half |
set port <portlist> speed {10 | 100 |
set port <portlist> mdix {auto | normal
set port <portlist> flowcontrol {enable
set port <portlist> description
set port <portlist> accept-frame {tag |
set jumbo port <portlist>{enable |
set port <portlist> pvid <1-4094>
Function
Enables or disables the port.
Sets the combo port to switch between the
electrical mode and the optical mode.
Controls switchover between 1000 Mbps optical
ports and electrical internal ports.
Sets the advertisement of the maximum port speed
duplex information.
Sets the advertisement of the port speed duplex
information.
Sets the working mode of the port to full duplex
or half duplex.
Sets the speed of the port to 10 Mbps, 100 Mbps,
or 1000 Mbps, or auto.
Sets the line sequence identification function.
Enables or disables the port flow control function.
Sets port description information.
Sets the packet type that the port allows to accept.
Enables or disables the port jumbo function.
Sets a default port PVID.
5-6
ZTE Proprietary and Confidential