Zte ZXR10 2900E series Configuration Manual page 255

Command
zte(cfg-group)#
<HH.HH.HH.HH.HH.HH>]}
zte(cfg-group)#
zte(cfg-group)#
show group (all configuration modes)
show group candidate (all configuration modes)
show group member [<1-253>] (all configuration modes)
zte(cfg-group)#
zte(cfg-group)#
zte(cfg-group)#
rlogin {commander | member <1-253>}(all configuration modes)
ZGMP Configuration Instance
l
Configuration Description
See Figure
Here, set the VLAN where the public network IP address of the command switch in
the cluster resides to 2525, the IP address to 100.1.1.10/24, the gateway address
to 100.1.1.1, the cluster management VLAN to 4000, the private address pool to
192.168.1.0/24, and the IP address of the TFTP Server in the cluster to 110.1.1.2.
SJ-20130731155059-002|2013-11-27 (R1.0)
set group mac-mode {standard | extend [mac
set group syslogsvr <A.B.C.D>
set group tftpsvr <A.B.C.D>
save member {<idlist>| all}
erase member {<idlist>| all}
reboot member {<idlist>| all}
6-18, the initial configuration of the switches is the default configuration.
6-25
Chapter 6 Management
Function
Sets a protocol multicast address
of cluster management.
Sets an IP address of the SYSLOG
server in a cluster.
Sets an IP address of the TFTP
server in a cluster.
Displays cluster configuration
information.
Displays candidate switches.
Displays a member switch or all
member switches.
Saves the configuration of a
member switch to a file.
Deletes the configuration of a
member switch.
Restarts a member switch.
Remotely logs in to the cluster
device.
ZTE Proprietary and Confidential