Zte ZXR10 2900E series Configuration Manual page 146

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#
zte(cfg-router)#
client-id | hostname | lease }
zte(cfg-router)#
{dns-server | domain-name | route | static-route | tftp-server-name}
zte(cfg)#
zte(cfg)#
disable | enable }
zte(cfg)#
{disable | enable | time <30-65535>}
zte(cfg)#
show dhcp snooping database (all configuration modes)
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
SJ-20130731155059-002|2013-11-27 (R1.0)
set dhcp relay global-ipport <0-63>{enable | disable}
clear ipport < 0-63> dhcp client { class-id |
clear ipport <0-63> dhcp client request
set dhcp snooping bind-entry database read
set dhcp snooping bind-entry database recovery{
set dhcp snooping bind-entry database time-write
set dhcp snooping bind-entry database write
set dhcp special udp-light-check {enable | disable}
set dhcp snooping vlan <vlanlist>{ disable | enable }
set dhcp snooping quota <0-8191>
set dhcp snooping vlan <vlanlist> quota <0-8191>
set dhcp snooping port <portlist> quota <0-8191>
5-98
ZTE Proprietary and Confidential
Function
Enables the DHCP relay function
on an IP port globally. When
the DHCP relay selects a source
IP address, if no IP address is
configured for the VLAN, the IP
address of the IP port is used as
the source address.
Clears DHCP client optional
sending information configuration.
Clears the configuration requesting
DHCP server to return various
information.
Reads DHCP binding entry from
the Flash memory.
Recovers binding entry from the
Flash memory after restarted.
Writes DHCP binding entry into
the Flash memory at regular time.
Writes DHCP binding entry into
the Flash memory.
Displays configuration related to
DHCP database.
Enables/Disables DHCP
udp-check function globally.
Enables/Disables snooping
function of a VLAN globally.
Sets the quota of a DHCP binding
table globally. The value 0 means
that the quota is not limited.
Sets the quota of a DHCP binding
table based on a VLAN. The value
0 means that the quota is not
limited.
Sets the quota of a DHCP binding
table based on a port. The value 0
means that the quota is not limited.