Configuring Dhcp Client - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
zte(cfg)#set dhcp ip-source-guard add port 49
zte(cfg)#set dhcp option82 add port 49,50
l
Configuration Verification
zte(cfg)#show dhcp snooping
DHCP snooping is enabled on the following port(s):
PortId
------
49
50
DHCP snooping disabled vlan: none
zte(cfg)#show dhcp option82
DHCP option82 is enabled on the following port(s):
PortId
------
49
50
zte(cfg)#show dhcp
DHCP download flag is disabled, config file is found.
DHCP download will not startup, when system reboot.
DHCP config file(option-67) *.dat will be translated to ZXR10_2952E.dat.
DHCP snooping-and-option82 is enabled.
PortId
------
49
50
51
52
DHCP client is disabled.
zte(cfg)#show dhcp ip-source-guard
Ip source guard is configured on the following port(s): 49

Configuring DHCP Client

l
Configuration Description
The PC can get an IP address from the specified DHCP server. See
SJ-20130731155059-002|2013-11-27 (R1.0)
PortType
--------
Client
Server
PortType
--------
Client
Server
PortType Snooping
-------- --------
Client Enabled
Server Enabled
Client Disabled
Client Disabled
5-100
Option82
--------
Enabled
Enabled
Disabled
Disabled
ZTE Proprietary and Confidential
Figure 5-32.