Table 5-2 Syslog Log Information - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
The Syslog protocol is classified by information source and the information is filtered by
function module, which satisfies customized user demands.
The Syslog protocol can classify the log information into eight levels from the highest to
the lowest level of importance. For a description of the levels, refer to

Table 5-2 Syslog Log Information

Severity Level
Emergencies
Alerts
Critical
Errors
Warnings
Notifications
Informational
Debugging
Configuring Syslog
The Syslog configuration includes the following commands:
Command
zte(cfg)#
dhcp| radius | AAA}{enable | disable}
zte(cfg)#
warnings | notifications | informational | debugging }
zte(cfg)#
<A.B.C.D>[name <name>][<0-65535>]
zte(cfg)#
zte(cfg)#
show syslog status (all configuration modes)
Syslog Configuration Instance
l Configuration Description
Suppose that the syslog function of the switch is enabled, information level is
informational, all function modules are enabled, the server IP address is 192.168.1.1,
and the name is Srv1.
l
Configuration Procedure
zte(cfg)#set syslog enable
zte(cfg)#set syslog level informational
SJ-20130731155059-002|2013-11-27 (R1.0)
set syslog module {all | arp-inspection | commandlog |
set syslog level {emergencies | alerts | critical | errors |
set syslog add server <1-5 > ipaddress
set syslog delete server <1-5>
set syslog {enable | disable}
Description
Crucial fault.
Fault that must be corrected quickly.
Key fault.
Fault that needs to be noticed but not important
Warning, indicating a potential fault.
Information that needs to be noticed.
General prompt information.
Debug information.
5-90
ZTE Proprietary and Confidential
Table 5-2.
Function
Enables or disables the syslog
module.
Defines the syslog information
level.
Sets the syslog server.
Deletes the syslog server.
Enables or disables the syslog
function globally.
Displays the syslog configuration.