Figure 6-48 Telnet Login Instance - Zte ZXR10 2900E series Configuration Manual

Figure 6-48 Telnet Login Instance

l Configuration Procedure
1. Configure the switch
By default, the Telnet server function is enabled. You can use the following
command to make sure that the function is enabled.
zte(cfg)#show Telnet
2. Configure the PC
Windows 2000 provides the Telnet client and server programs. Telnet.exe
is the client program and tlntsvr.exe is the server program. In addition,
Windows 2000 provides the Telnet server management program tlntadmn.exe.
By default, the Telnet service is installed in Windows 2000.
Execute the Telnet command on the PC, see
Figure 6-49 Executing the Telnet Command on the PC
For the Telnet login result, see
SJ-20130731155059-002|2013-11-27 (R1.0)
Telnet server is enable
Telnet server is listening on port 23
Note:
Figure
Figure 6-50.
6-53
ZTE Proprietary and Confidential
Chapter 6 Management
6-49.