Time Range Configuration; Figure 5-52 Tacacs+ Configuration Instance - Zte ZXR10 2900E series Configuration Manual

Figure 5-52 TACACS+ Configuration Instance

l Configuration Procedure
zte(cfg)#set loginauth tacacs-plus+local
zte(cfg)#set adminauth tacacs-plus+local
zte(cfg)#config router
zte(cfg-router)#set ipport 1 ipaddress 192.168.1.1 255.255.255.0
zte(cfg-router)#set ipport 1 vlan 1
zte(cfg-router)#set ipport 1 enable
zte(cfg-router)#exit
zte(cfg)#config nas
zte(cfg-nas)#tacacs-plus group zte enable
zte(cfg-nas)#tacacs-plus group zte add host 192.168.1.100
zte(cfg-nas)#tacacs-plus loginauthen default group zte
zte(cfg-nas)#tacacs-plus loginauthor default group zte
zte(cfg-nas)#tacacs-plus adminauthen default group zte
zte(cfg-nas)#tacacs-plus accounting commands default group zte
zte(cfg-nas)#tacacs-plus accounting exec default group zte
zte(cfg-nas)#tacacs-plus accounting update period 10

5.40 Time Range Configuration

Time Range Overview
There are several conditions in the time range configuration.
l
Configure a time range for each day: Specify the exact start time and end time. If the
start time and the end time are not configured, the time range is a full day.
l
Configure a period: Specify the period to be a certain day of a week.
l
Configure a date range: Specify the start date and end date. If the start date and the
end date are not configured, the start date is the day when the configuration takes
effect and the end date is the day when the configuration is invalid.
SJ-20130731155059-002|2013-11-27 (R1.0)
Chapter 5 Service Configuration
5-145
ZTE Proprietary and Confidential